Enarco CRENA 22, Инструкция по эксплуатации

Страница: 177 / 216

REVERSIBLE VIBRATORY PLATE COMPACTOR
31
CRENA 52*, 63*
en
9.3 OPERATING THE MACHINE
It moves on the skew
•
Insufficient engine capacity
•
The clutch is slipping
•
The V-belt is slipping
•
Too much vibrating oil
•
Internal parts of the vibrator are faulty
It does not advance
•
V-belt uncoupled or slipping
•
The clutch is slipping
•
Mechanical fault in the cam box: contact technical department (SAT) at
Enarco.
•
It vibrates but does not move. The vibrator may be on a slippery, wet
surface. Try on the right surface.
Moves back very slowly
•
Lack of oil in the hydraulic control unit for the compactor: top up with oil
following the instructions given in point ¡Error! No se encuentra el
origen de la referencia..
•
Air in the hydraulic control circuit: purge the circuit.
Moves forward very slowly
•
Too much oil in the hydraulic control unit: remove oil from the circuit until
it reaches the control level.
Hydraulic oil leaks
•
Loss of oil-tightness, flaws in hydraulic hose: replace the faulty
components.