Enarco CRENA 22, Инструкция по эксплуатации

Страница: 150 / 216

REVERSIBLE VIBRATORY PLATE COMPACTOR
en
4
CRENA 52*, 63*
2 SAFETY INSTRUCTIONS
2.1 SAFETY INSTRUCTION FOR OPERATING LIGHT CONSTRUCTION EQUIPMENT
2.1.1
Requirements for Operator’s Qualification
In general, no licence is required for operating light construction equipment. The person authorized to
operate the construction equipment should meet the conditions listed below.
1. Persons employed as operators of the machine should:
•
be of age of 18 or older;
•
be physically and mentally competent;
•
be trained for the work and prove their abilities to the employer;
•
can be expected to fulfil reliably the committed tasks;
•
get employer´s authorization to operate the machine.
2. The operator should read and understand the Operation Manual before starting the work and then
adhere to the instructions included within.
3. The operator should be aware of safety instruction valid for operation of the machine and
these instructions must be observed when working with the machine. Knowledge of the safety
instructions should be provable, i.e. the e
mployer should obtain the operator’s signature to confirm
he read and understood the instructions.
2.1.2 Obligations of the Contractor
The contractor is understood to be a physical or corporate entity that is providing construction works and
uses the construction machine for such purposes. The contractor guarantees safe operation of the machine.
The contractor is obliged mainly:
•
to designate an operator of the machine and to make sure he is trained for the work;
•
to provide to the operator conditions for safe operation of the machine;
•
to control maintaining of the safety instructions;
•
to control that the operator is using the machine in accordance with the Operation Manual;
•
to ensure regular inspections, maintenance and repairs of the machine;
•
to make sure that the Operation Manual is placed in such a place, where it would be available
to the operator in a case of need;
•
to provide suitable, safe and adequately secured storage place for the machine whenever not in
use.
Further, the contractor is obliged to ensure maintaining of lawful requirements for operational safety as well
as regulations valid for the respective jobsite.
2.1.3 Obligations of the Operator
The operator is to be designated by the contractor, while the conditions of point 2.1.1. have to be met.
The operator is required mainly:
•
to read and understand the Operation Manual including the safety instructions before
commencing the work;
•
to observe all stipulations of the Operation Manual;
•
to acquaint himself with the jobsite including safety instruction valid for the respective jobsite;
these must be adhered to while working;
•
pay full attention to operation of the machine while working;
•
to ensure that all regular inspections, maintenance and repairs of the machine are carried out in
accordance with the Operation Manual;