ENAR PEN10B, Инструкция по эксплуатации

Страница: 20 / 28

en
7.6 ADJUST THE CARBURETTOR
7.6.1.
Start the engine up and wait until it reaches the working temperature.
7.6.2.
Keep the engine idling and turn the accelerator stop screws until the standard idling
speed is reached: 1400 r.p.m.
150
200
−
+
ACCELERATOR
STOP SCREW
7.7 CLEAN THE SEDIMENT LID
7.7.1.
Close the fuel valve.
7.7.2.
Take out the sediment lid with the O-ring.
7.7.3.
Wash them in non-inflammable solvent, dry and reinstall them firmly.
7.7.4.
Open the fuel valve, check that there are no leaks and that the area is dry before
proceeding to start the engine up.
O-RING
SEDIMENT LID
VIBRATING PLATES
18
PEN10B-PEN13C-PEN16C-PEN16D