Version
Document Title
Release Date
08
EL2.0
–
Installation Manual
2020-03-18
EL2.0 Installation Manual
–
Rev.08 Mar 2020
5
WELCOME
Thank you for choosing the EL2.0 hydrogen generator. Please read through this Installation Manual carefully before
performing any operation.
If you have any further question on the installation of the device, please contact the Enapter Srl Help Centre. Quote
the system serial number when contacting us; you will find the serial number on the type plate placed on the rear
side of the module.
Enapter Srl
Headquarters: Via di Lavoria 56/G
56040 Crespina (PI)
–
Italy
T. : +39 050 644 281
Email: [email protected]
Website: www.enapter.com
SCOPE OF THE DOCUMENT
This installation manual provides the installer with the information needed to carry out the installation of the EL 2.0.
The information contained in this manual will help you to install the hydrogen generator safely and correctly.
Keep this installation manual in a safe place and readily
available. Always follow its instructions. It is the operator’s
responsibility to ensure that an installed EL2.0 is in a proper condition at all times. Please observe any additional
local requirements applicable to the installation of the EL2.0.
APPROVED USE
The EL2.0 hydrogen generator has been designed to produce pure hydrogen that can be used directly for fuel cells
or other hydrogen consuming applications.
The unit must only be operated for this purpose, according to the specifications and instructions provided in this
manual.
Adherence to this installation m
anual is part of “normal use”.
Danger of injury due to improper use!
Improper use of the product can result in serious injuries.
•
Ensure that the manual is accessible at all times.
•
Make sure you have read and understood this manual in its entirety.
•
Comply with all safety instructions and warnings.
•
Store the manual and other documentation in a safe place and pass them on to future owners
of the product.
•
Comply with all local regulations.
