Troubleshooting:
Problem:
The unit fails to operate, or operates incorrectly.
Action #1:
Make sure that you have fresh batteries in the unit and that
they are installed according to proper polarity. You will hear a tone
emitted from the unit when you install the batteries correctly.
Action #2:
Make sure that the volume is turned up to an audible level
Action #3:
Make sure that there is nothing inhibiting the depression of
the switch plate OR holding the switch plate down (i.e. icons, crumbs,
sticky juice, etc.)
Action #4:
If you are using an external capability switch, make sure that
there is a TIGHT connection between the switch and the unit (there
should be NO gaps). Especially check this when using adapters. Any
gaps will cause the unit to function incorrectly or not work at all.
Action #5:
If you are using an external capability switch, test that switch
with another device to rule out the switch as the source of the problem.
Do the same with any adapters that you may be using.
Care of the Unit:
The Small Talk Sequencer can be wiped clean with any mild household
multi-purpose, non-abrasive cleaner and disinfectant. We recommend
Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not use
abrasive cleaners, as they will scratch the surface of the
unit.
Do not submerge
the unit, as it will damage the electrical components.
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
Small Talk Sequencer #8151 & 8151Y
(Set of 3 Red) # 4107
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
