23 / 81
EMYCSA
RealSimulator
Firmware Update
Date:
17/07/2020
Version:
1.00
PICTURE
DESCRIPTION
Usually, you will receive your RealSimulator device with the last firmware version
installed. Therefore, it will not be necessary to use DCC to update your device
immediately after its reception.
If you check the product and download web pages periodically, you could find new
versions with enhancements and issues fixed, so you will need to use the DCC
application.
The F18CGRH will be shown in the Device and printer windows as F18CGRH or RS-
F18-CGR HOME in function of if you have already installed the RS_TOOLS or not. In
any case, there is not more devices with similar name to create a confusion.
To better understand the next explanation, you must imagine the F18CGRH as a
device with two internal modules: a main module that works normally with the features
we explain in this user guide and another one, named Bootloader, which allows
changing (updating) the main module. As you will see in the update procedure, we
need to follow a sequence to change between modules.
Follow the steps explained in detail below:
1. Make sure the F18CGRH is active.
2. In Control Panel, Device and Printers, remove the RS-F18-CGR HOME device.
3. With the grip buttons, launch (Trigger 2 + Sensor Control Recce center
simultaneously) the sequence to start the Bootloader device.