EMX Industries, Inc.
Tech support: 216-518-9889
1/8
PhotoeyeVault_Rev1.0_112520 [email protected]
PhotoeyeVault
™
Protection Bollard
Instruction Manual
The PhotoeyeVault is a security-style bollard that protects photoeyes and provides
a stylish alternative to visible hardware. Keep photoeyes safe from vandalism, inclement weather,
and accidental contact damage with this solid steel fixture. The PhotoeyeVault hides electronics
while blending in with the surroundings. It is compatible with EMX IRB-RET, EMX IRB-MON, and
EMX IRB-4X photoeyes.
Contents
A. PhotoeyeVault Kit Parts
Page 2
B. Tools and Materials for Field Installation
Page 3
C. Prerequisites to Installing the PhotoeyeVault
……
.......................................................................
Page 3
D. Installation Steps
…
................................................................................................
.......................
Page 5
Step 1: Unbox PhotoeyeVault Kit
Page 5
Step 2: Mount Photoeye* and PhotoeyeVault
Page 5
Step 3: Connect Wiring
Page 7
Step 4: Aim PhotoeyeVault
Page 8
Step 5: Conclude the Installation
Page 8
*EMX photoeye sold separately
Cautions and Warnings
This product is an accessory or part of a system. Install the EMX PHOTOEYE (IRB-RET,
IRB-MON, or IRB-4X) according to instructions from the gate or door operator manufacturer.
Comply with all applicable codes and safety regulations.
Specifications
Housing Material
.120” 11
-gauge steel post
1/8” steel base plate
Up to 115 ft (35 m)
Dimensions
4.25” x 4.25” x 24.25” post
8 x 8” base plate
ononly)
Finish
Black powder coat
Weight
16 lbs
TM
