Quick St
art Guide
Developer Kit
Connecting Terminal Interface
Hardware Setup
To communicate with the bootloader a RS232 terminal interface is used. Use the null
modem cable to connect the DSUB-connector with a free serial port of your PC.
Please use the following configuration for your terminal software:
Baudrate: 115,2k
Stopbits:
1
Databits: 8
Flow control: none
Parity: none
Connector Overview
Connecting
Reset Button
Power Input (5V/2A)
Digital I/Os, I²C, SPI, ...
LCD (18Bit RBG)
CAN2 (LVTTL)
(use ADA-CAN_3V3)
CAN1
microSD
Ethernet Voltage
Digital I/O Extension
Video In digital
UART (RS232)
HDMI (optional)
Headphone Out
UARTs (LVTTL)
(use ADA-RS232 and ADA_UART)
Ethernet
Backlight Power
USB Device
USB Host
Connecting Ethernet Interface
Use the Ethernet interface for fast software updates or Internet communication. Just
connect the hardware and your Ethernet switch to an Ethernet cable.
Because emtrion uses different Ethernet Controllers on the DIMM modules the voltage for the
LAN transformer must be configured depending on the used CPU module. You can set the voltage with
the jumper J4 on the DIMM-Base Verno.
The following table shows the position of the jumper
according to the CPU module:
CPU module
J4
CPU module
J4
DIMM-SH7723
1V8
DIMM-MX257
3V3
DIMM-SH7724
3V3
DIMM-MX53
3V3
CPU module
J4
DIMM-EMEV2
1V8
DIMM-MX6
3V3
DIMM-AM335
3V3
