ww
w.emsg
roup
.co
.uk
Radio D
etec
tor Base
PRESS HERE T
O
L OG ON
IDENT
ww
w.emsg
roup
.co
.uk
Radio D
etec
tor Base
PRESS HERE T
O
L OG ON
IDENT
w
w
w
.emsg
r
oup
.c
o
.uk
R
adio D
et
ec
t
or Base
PRESS
HERE T
O
L
OG ON
IDENT
63 mm
1
Pre installation
4 Power device
To unlock, insert a 1.5
mm allen key into the
allen key slot and turn
anticlockwise as shown.
3 Fix mounting plate
2
Components
device
unpowered
(pins unlinked)
device
powered
(both pins linked)
!
Installation must conform to applicable local installation
codes and should only be installed by a fully trained
competent person.
Ensure that the device is installed as per the site survey.
The use of a non-metallic spacer should be considered if
mounting the device on to a metal surface.
Do NOT Press the Log On button on a pre-programmed
device. This will cause communication with the Control Panel
to be lost. Should this happen, delete the device from the
system and add it back on.
This device contains electronics that may be susceptible to
damage from Electrostatic Discharge (ESD). Take appropriate
precautions when handling electronic boards.
Detector
Wireless module incl. 300mm cable
Mounting plate
Remove the mounting plate by turning the device
ANTICLOCKWISE, to release it from the mounting plate.
5 Optional device locking
6 Configuration
To lock the detector into
the wireless module,
insert a 1.5 mm allen key
into the allen key slot and
turn clockwise as shown.
Use both mounting holes to ensure a firm fixing.
Use suitable fasteners and fixings.
Once powered, reassemble the device.
Wireless Detector c/w Remote Indicator
Installation Guide
FCX-170-101 Wireless Detector Base c/w Remote Indicator Unit
5-RIM Remote Indicator Unit Only
Example shown:
Model FCX-170-101
Part no Product description
SIZE AA
SIZE AA
SIZE AA
SIZE AA
SIZE AA
SIZE AA
5
6
Dust cover
4
OBSERVE CORRECT POLARITY, USING SPECIFIED BATTERIES.
If fitting / re-fitting batteries; observe correct polarity, using
only specified batteries.
Connect the power jumper across the PIN header.
w
w
w
.emsg
r
oup
.c
o
.uk
R
adio D
et
ec
t
or Base
PRESS
HERE T
O
L
OG ON
IDENT
2
3
1
5
6
4
7
Front cover
Mounting plate
2
3
7
Fixing screws
1
Remote indicator unit
Wireless detector
©2021 EMS Ltd. All rights reserved Page 1 of 2
TSD033-99 Iss 6 23/11/2021 AJM
www.emsgroup.co.uk
Radio Detector Base
PRESS HERE TO
LOG ON
IDENT
The device’s loop address is configured within the user interface’s
menu structure.
Refer to the programming manual for full programming details.
Free to download from
www.emsgroup.co.uk
FireCell = MK98
Fusion = TSD062
WZM = TSD143
