SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
23-15-30
1-10
8 MAY 09
•
A standard VT100 compatible terminal or computer running an emulator
program such as HyperTerminal©, ProComm (PCPLUS)©, or another serial
communication package provides the user interface to the HSD-Xi terminals
MPU. Configure the connection as follows:
•
Bits per second—19200
•
Data bits—8
•
Parity—none
•
Stop bits—1
•
Flow control—none
The HSD-Xi terminals supports two different end user access levels within the
maintenance port architecture: End User and Field Representative.
(1) End User Access: Level 1
Password:
menu
This limited-access level is for anyone without technical training on the product. It
provides read-only access to help users diagnose problems with the assistance of
product support personnel.
(2) Field Representative Access: Level 2
Password:
maint
This level is for trained installers and product support personnel. This access level
supports read and limited write capabilities. Users are able to disable/mask/clear
faults, change satellite or LES preferences, view and modify certain EEPROM
parameters, and perform other maintenance or upgrade functions.
"Test and Fault Isolation" on page 4-1 provides a detailed description of the two levels
of user access and the menus, report selections, functions, and system diagnostic
procedures of the HSD-Xi terminals MPU.
9.
Initiated Self-Test
The initiated self-test occurs during the power up sequence, or when you press and hold down
the TEST button on the front panel of the terminal for 100 milliseconds or more.
Содержание eNfusion 1252-A-4100-01
Страница 4: ...23 15 30 CR 2 8 MAY 09 Blank Page ...
