Version 1.0 Sep. 2007
1 GENERAL
INFORMATION
This Secure Drive Enclosure kit
package contains:
•
HDD Enclosure
•
USB cable
•
Software, Driver and Manual CD
•
Quick Start Guide
•
Power Adapter
•
Screws / Screwdriver (for applicable models only)
2 GETTING STARTED
Hardware
Installation
Assembling your hard drive to the Enclosure kit
1. Open the case with a screwdriver.
2. Gently lower the hard drive to rest
against the board.
Note:
The pictures are only for illustration and actual accessories may
differ from picture
.
3 SETTING
UP
Security Software Setup
1. Insert the Installation CD into your CD-ROM drive.
Select “
Software & Win98 driver
”.
2. When this screen appears,
For Windows 98/SE:
Select “
Install Win98 Driver
” before proceeding to next
step.
For Windows XP/Me/2000/Vista
Select “
Configure to Secure Drive
”.
Caution:
Configuring to
Secure Drive
destroys any existing data. Be sure to
back up the disk contents first.
3. When this screen appears, follow the on-screen instructions.
1) Enter
【
New Password
】
2) Re-enter
【
Confirm New Password
】
3) At
【
Hint
】
prompt, enter a suitable phrase to help you recall
your password later on.
4) Click
【
Prepare Secure Drive
】
4.
When the installation is complete, please re-connect the USB
drive into the computer’s USB port for the new configuration to
take effect.
Note
: In order to remove the device to take effect, you could choose either
device’ end or computer’s end (USB cable) to unplug and re-plug
the USB cable. Otherwise, system will still show the old data in the
drive.
Quick Start Guide
•
Mac users please refer to Mac user guide in utility CD.
1. Pull out the tray of the
HDD case.
2. Connect the tray to your
hard disk
3. Fasten the hard drive’s
mounting holes to the Case
Frame with 2bigger screws.
4. Plug the LED power
connecter.
5. Push the hard disk into
the case.
6. Fasten the hard disk to the
case
7. Connect the USB/Power
cable to correct port.
8. Turn on the power switch.
