Empire EMT-7R, Инструкция и каталог запасных частей

Страница: 17 / 46

Combination Bead & Crimp
•
Remove the large shaft spacing collars on the top and bottom shaft
•
Install the top and bottom crimp rolls with the recess in the face of the roll to the
back of the shaft.
•
Install the male bead roll on the bottom shaft with the highest portion of the roll
facing out.
•
Install the female bead roll on the top shaft with the highest portion of the roll
facing out.
•
Bring the top shaft down until the rolls mesh together.
•
Tighten the locking collars.
•
Adjust the backstop up to the end of the crimp rolls and tighten.
•
When you are ready to form the crimp. With the rolls separated place your
material over the bottom roll until the material is against the backstop.
•
DO NOT START THE MACHINE UNTIL YOU BRING THE TOP ROLL
DOWN AND TIGHTEN FIRMLY TOGETHER SANDWICHING THE
MATERIAL BETWEEN THE ROLLS.
•
You can now press on the footswitch and begin the crimping process.