37101-6-0620
Page 1
Empire Comfort Systems Inc. • Belleville, IL
FOR USE ON MODELS: DVLL(36,48,60,72)BP,SP SERIES FIREPLACES ONLY
INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR FUTURE REFERENCE AFTER INSTALLATION.
DECORATIVE FRAME MODELS
DVLL36
DVLL48
DVLL60
DVLL72
DFF36LFPD
DFF48FPD
DFF60FPD
DFF72FPD
DFF36LBL
DFF48LBL
DFF60LBL
DFF72LBL
DFF36LBZT
DFF48LBZT
DFF60LBZT
—
CLEANING
With the unit turned off and cool to the touch, use a 50/50
solution of vinegar and water and a clean soft cloth to
remove dirt and fingerprints. Clean frame before and
after start-up and again anytime oil or fingerprints are
present. When heated, oil from fingerprints or left over from
manufacturing can permanently discolor the plating.
TOOLS NEEDED:
•
Phillips Screwdriver
INSTALLATION
1. Remove the fireplace barrier screen assembly. Lift up
the barrier screen approximately 3/8 inch, then pull
forward to remove it from the fireplace.
2. Install on front bracket per side with two #8 x 1/2-inch
screws each.
See Figure 1.
Figure 1
3. Reinstall the barrier screen assembly.
4. Insert the extended bracket tabs on the rear of the
Forged Iron Decorative Front into the front brackets
installed in Step 2.
See Figure 2.
Figure 2
5. Installation is complete.
See Figure 3.
Figure 3
INSTALLATION INSTRUCTIONS
DECORATIVE FRONTS
