38434-2-0220
Page 1
Empire Comfort Systems Inc. • Belleville, IL
GAS-FIRED
INSTALLATION INSTRUCTIONS
DVCT30 AND DVCT35 LINER KITS
LEAVE INSTRUCTIONS WITH THE HOMEOWNER.
BLACK REFLECTIVE LINERS
DVCT30CBN
DVCT35CBN
Description
DVP30CPKR-1
DVP35CPKR-1
Black Reflective Liners
CARTON CONTENTS
Description
Black Reflective Liners
Description
Black Reflective Liners
Rear Liner
1
Liner Bracket
1
Left Liner
1
Rear Liner Bracket
1
Right Liner
1
Glass Liner Bracket
2
Bottom Liner
1
#10 X 1/2" Screw
3
Top Liner
1
—
—
TOOLS NEEDED:
Phillips Screwdriver
REFLECTIVE LINER INSTALLATION
NOTICE:
Before You Begin
The glass panels are smooth on one side and textured on the other. Install liners with smooth side facing burners.
Figure 1
Figure 2
1. Remove barrier screen and glass door. Remove log set
and existing liner kit if applicable. Store each in a safe
location.
2. Loosen screws indicated.
See Figure 1.
3. Slide rear liner bracket up under screw heads as shown in
Figure 2 a, b.
Hold rear liner bracket and tighten screws
using screwdriver. (Do not use socket driver.)
REAR LINER
BRACKET
REAR LINER
BRACKET
REAR
LINER
BRACKET
a.
b.