Empertech KB-DA4060, Руководство пользователя

Страница: 13 / 25

5
2 Interfaces
Front Panel
Table 1 Front Panel
NO Name Description
1 POWER
Power indicator light.
The light is green when the DA is working normally.
2
CH1
PROTECT
DA protection indicator light. When the DA overheats, experiences
over-current, over-voltage, or under-voltage, the DA automatically
protects the equipment. In this case, the light turns yellow.
3 CLIP
Peak clipping indicator light. When the input signal exceeds the
rated peak value, the indicator light turns red.
4 SIGNAL
Signal indicator light.
This light turns green and fluctuates depending upon the signal
intensity. If the light is off, there is no input signal.
5
CH2
PROTECT
DA protection indicator light. When the DA overheats, experiences
over-current, over-voltage, or under-voltage, the DA automatically
protects the equipment. In this case, the light turns yellow.
6 CLIP
Peak clipping indicator light. When the input signal exceeds the
rated peak value, the indicator light turns red.
7 SIGNAL
Signal indicator light.
This light turns green and fluctuates depending upon the signal
intensity. If the light is off, there is no input signal.
5
CH3
PROTECT
DA protection indicator light. When the DA overheats, experiences
over-current, over-voltage, or under-voltage, the DA automatically
protects the equipment. In this case, the light turns yellow.
6 CLIP
Peak clipping indicator light. When the input signal exceeds the
rated peak value, the indicator light turns red.
7 SIGNAL
Signal indicator light.
This light turns green and fluctuates depending upon the signal
intensity. If the light is off, there is no input signal.
5 CH4 PROTECT
DA protection indicator light. When the DA overheats, experiences
over-current, over-voltage, or under-voltage, the DA automatically
protects the equipment. In this case, the light turns yellow.