See overleaf for further setting up information
Sensor selection. This thermostat is a combination model allowing you to choose
between 4 different models. (A, AF,F )
A model: air only, with built in sensor
AF model: air & floor , with both built in and remote sensor
F model: floor only, with remote sensor
Configuration Menu
Turning ON/OFF Your Thermostat
Press buttton to turn the thermostat ON or OFF. When thermostat is turned off, LCD will display OFF.
This thermostat is full of useful features which can be set quite easily through the feature configuration menu. To access the feature configuration menu, simply turn off your thermostat
and hold button M for 5 seconds. Now you can see Menu 1, to proeceed to other menu, press button M again. To exit menu, press button
Menu #
1
Switching differential.
Calibrate the room temperature. This feature is used to compensate for any difference
Calibrate the floor temperature. This feature is used to compensate for any difference
Set the floor temperature limit.
Set backlight turning-on time. Selecting on will turn the light on continuously.
Selecting off will turn the light off. Selecting 20 seconds will turn the light on for 20 seconds.
Select temperature format
Optimum start(preheat). This feature is to ensure that the required temperature has
already been reached when you get up in the morning or come home from work.
Select 12 / 24 hour clock
24
12 / 24
Pump protection(for hydronic heating only). In hydronic heating installations, it is
recommended to activate the pump at least 15 seconds every 24 hours in order to
avoid any seizing. Select ON to activate this feature, OFF to deactivate. When the
thermostat is activating the pump, the icon will blink.
2
3
4
5
6
7
8
9
10
11
12
Feature Description
Factory Default
Feature Value
0°C
OFF
ON / OFF
ON / OFF
OFF
7_0
5_2 / 6_1 / 7_0
OFF
ON / OFF
40 °C
20°C ~ 40 °C
20 seconds
20 seconds / ON /OFF
°C / °F
°C
A / AF / F
A
Press or to select
This product should be installed by a qualified electrician.
The number of degrees difference between switching off at the
between the displayed room temperature and a thermometer.
between the displayed floor temperature and a thermometer.
This feature is to protect the floor surface.
°C or °F.
Buttons and LCD display
Buttons
Short press
Press > 5 seconds
Turning on/off thermostat
Menu button( when thermostat is turned off)
Auto/Manual mode selection
Increase the set value
Bring up vacation mode
Check floor temperature (AF model only)
Decrease the set value
Lock /unlock buttons
Reset to factory settings
(when thermostat is turned off)
+
+
Set the time and week days
Cancel override( when in override mode)
Confirm settings
M
M
The buttons are locked.
Displays when heating is active
Symbol
Description
Auto mode(use button M to select)
Manual mode(use button M to select)
Vacation mode
Temporary temperature override
Frost protection activated
Set temperature
The program number
Program 1,2,
3,4,5,6
AUTO
SET AT
Program type selection. This gives user 3 options of program type.
5_2
will give you 5 days(Monday to Fiday) with the same six events(Wakeup, out, home,
6_1
will give you 6 days(Monday to Saturday) with the same six events(Wakeup, out, home,
7_0
will give you individual settings for each day from Monday to Sunday.
out, home,sleep) and 2 days(Saturday and Sunday) with the same six events.
out,home,sleep) and 1 day(Sunday) with the same six events.
Frost protection.
This feature is to avoid room temperature going below 5°C
E0 = The internal sensor has developed a fault. You should contact your thermostat retailer for assistance.
E1 = The remote floor sensor has not been connected, has been wired incorrectly or the probe is faulty.
LO = The room or floor temperature is below 0
Error
Message
°C
HI = The room or floor temperature is above 50 °C
Program button( when thermostat is turned on)
means the thermostat will switch the heating on 0.5°C below the set temperature and
will turn it off 0.5°C above the set temperature. With a 2°C differential, the heating will switch
on 1°C below the set temperature and switch off 1°C above the set temperature.
1°C
1°C ~ 5°C
-5°C ~ +5°C
0°C
-5°C ~ +5°C
CS-11 LCD 7-Day 5+2 Programmable Digital Thermostat
U9310044
Registered Address: 6 Tannery Yard, Witney Street, Burford, Oxon., OX18 4DW
Tel: 01993 824900 : www.emmeti.co.uk : e: [email protected]
Temporary
set temperature and on again to reach the set temperature.The default is 1°C which
