RF-5615
OPERATING INSTRUCTIONS
The RF-5615 is a single channel, full-duplex radio frequency wireless headset microphone, with
a range greater than 25 feet.
The RF-5615 Wireless Headset System Includes:
Headset
Base
Station
DC 9V Adapter
Audio
Cable
Phone Line (2)
Phone Jack Splitter
Spare
Battery
To prepare to use your system you must first charge the headset battery in the Base Station.
Make sure you have all the components listed on the above list and proceed through the step-by-
step instructions.
Step 1.
Base Station Location
The Base Station should be accessible for charging your headset and spare battery. Suggested
location: to the side of your computer with line-of-sight to your headset. Please allow four
inches separation between the Base Station and your monitor or CPU if possible.
Step 2. Connections
i.
Wall Adapter:
Plug the DC Adapter plug into the jack marked 9V DC on the base
station and the transformer into the AC wall outlet.
ii.
Audio Cable:
Connect the
red
Microphone plug
into the jack marked PC MIC on the
base station, and the plug the other end into the microphone jack of your
the speaker jack of the soundcard on your computer.
Note: If you want to use your external speakers, plug the external speakers into the jack of the Base Station
labeled E
iii.
Telephone:
1.)
Unplug your telephone line from your phone and plug it into the
2.)
Plug one of the black Phone Lines into a slot of the Phone Jack
3.)
Plug the last black Phone Line into the remainging Phone Jack
Step 3. Operation
i.
CONFIRM ALL SWITCHES ARE IN CORRECT POSITION.
