emitor Satlook Digital NIT, Руководство пользователя

Страница: 14 / 21

3.6. Setup
Basic-operation setup:
1. LNB L.O . Select the LNBs L.O. for showing the correct
LNB frequency. Default setting is button nr 9 (IF).
2. Analog . Chose between Normal (KU-band) or Inverted
(C-band) video.
3. Motor. Chose the type of actuator to be used; standard
DiSEqC 1.2, SatSelect or SATSCAN.
4. Display . submenu units : Select dB-presentation: dbuV,
Dbm or dBmV. Under submenu LCD can contrast (level)
and Backlite (on/off) be set.
5. AutoOff. Chose between some automatic turn-off
alternatives (timer).
6. Version . Tells about the units serie-nr and manufactured
date.
7. Keyclick . On or off.
3.7. Beeper
It might be tricky to install a Sat-dish and, at the same time, try to watch the signal-
level on the instrument. Therefore the instrument has a very useful ”beeper”-
function to help finding the max-strength signal. It works with a pitch tone that gets
higher and higher the better the signal gets. The beeper is turned on and off with
button nr 7.
Notice that the function works with a narrow bandwith (one transponder) and not with the full
bandwidth. To use the function put the cursor on top of a selected ”peak” and align the dish.
3.8. Spec
Select Special-functions with button nr 8 in the Mainmenu.
3.8.1. Max hold (1)
14