emitor Satlook Digital NIT, Руководство пользователя

Страница: 12 / 21

Text-editor:
When the channel (frequency) is saved, the Text-editor
appears on the monitor which makes it possible to enter a
name for that memory-position (ex. Digital).
Use the knob to select the first letter (ex. D) and save it with
the control-button. Move to the next letter (ex. i) and so on.
If a mistake is made and wrong letter is saved, simply
correct by pushing button nr 1 (Delete) and the cursor will
jump one position backward.
4. Channels Shows a list of the present TV- and Radio-channels on that
certain transponder/frequency (if the satellite is
transmitting NIT).
5. DiSEqC
Chose between the different DiSEqC commands by using
the buttons on the side of the instrument.
Submenu 7 (SWx) shows the extended DiSEqC-commands
(DiSEqC 1.1).
Submenu 8 (Motor) shows the command-list for DiSEqC
actuator-control (DiSEqC 1.2).
Even 13/18V and 22 kHz can be adjusted under the DiSEqC-
menu.
7. Beeper
It might be tricky to install a Sat-dish and, at the same time,
try to watch the signal-level on the instrument.
Therefore the instrument has a very useful ”beeper”-
function to help finding the max-strength signal. It works
with a pitch tone that gets higher and higher the better the
signal gets.
The beeper is turned on and off with button nr 7.
0. 13/18V Selection of 13V alt. 18V. The chosed position is displayed at
the top of the LCD-display.
#. 22kHz
22 kHz on/off. Chosed position is displayed at the top of the
LCD-display.
3.3. Full spectrum - ”Max zoom in” - Span Min /Span Max.
This function makes it easy to switch between full spectrum (920-2150 MHz) to ”Max
zoom in” (250 MHz bandwidth). The ”Max zoom in”-function is very good to use
when adjusting the cross-polarisation.
12