emitor Combolook Color HD страница 53 Скачать руководство пользователя | Manualshive

Страница: 53 / 56

background image

53

Appendix G- Maintenance

The instrument is equipped with a rechargeable battery and it is important that the
battery is maintained. Recharging should be done using the included car adaptor or
external power supply. (110-220V/14V DC, center-pin positive and chassis earth)

Please note that instrument can be operated, for shorter periods of time, by the external
power supply, however, the Combolook Color

HD

is not made for permanent operation

with the external power supply.  This will degrade the battery.  Contact your dealer for
more information.

Adjustments for vertical hold, brightness and contrast are located under the instrument.
Contact your dealer for proper adjustments.

The battery needs recharging when the battery symbol at the top of the LCD appears
empty.  For protection of the battery, when the battery voltage falls to an unsafe level,
“BATTERY EMPTY” is displayed on the LCD and then the instrument turns off.  Remember
that a cold battery has much lower capacity than one at room temperatures.  The
Combolook Color

HD

is designed for outside use in rough conditions but it should not be

exposed to rain or snow as this can damage or shorten the lifetime of the instrument.

Checking/charging the battery:
Because the instrument has been stored for some time before transportation it is
important to check the battery-condition.  To do this turn the main switch On.
When starting the instrument, the LCD color monitor and LCD display turns On.
There is a battery symbol at the top of the LCD display that shows the status of the
battery.  All black means that the battery is fully charged. If the symbol is empty it means
that the battery is nearly completely discharged.

If the battery needs recharging, use the power supply included with the instrument.
A thermometer scale (0-100%) is displayed on the LCD as the recharging starts.
Please note that the instrument should be turned off when being recharged.  Charging
will not be performed with the instrument is on.  Recharging from fully discharged
battery to about 98% capacity takes approximately 30 hours.  When the battery been
recharged the Combolook Color

HD

is ready to be used.

«
...
51
52
53
54
55
...
»

Содержание Combolook Color HD

























































Отзывы:

Нет отзывов

Похожие инструкции для Combolook Color HD

HOF14AFRQ 1F Series

Бренд: Halsey Taylor Страницы: 4

Comfort Solutions 1900e Series

Бренд: Taco Страницы: 12

AERCO AquaSolve AM8408-COM

Бренд: Watts Страницы: 8

Бренд: Jupiter Страницы: 16

Бренд: First Sales Страницы: 22

Бренд: Culligan Страницы: 4

Бренд: Aristel Страницы: 40

KSG21 Premium GT

Бренд: Galmet Страницы: 36

Бренд: cahors Страницы: 57

Бренд: Rain Soft Страницы: 52

DSX PRODUCT DESCRIPTION

Бренд: NEC Страницы: 162

Бренд: Uniden Страницы: 56

Бренд: Uniden Страницы: 13

Pure Water PWR4021 Series

Бренд: Watts Страницы: 32

Бренд: Watts Страницы: 2

Бренд: Taylex Страницы: 20

Бренд: HYBREX Страницы: 34

Бренд: J.E. Adams Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды