Emilia EMCER64, Инструкция по эксплуатации / Руководство по установке

Страница: 16 / 20

16
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least
30mm . Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate. As shown below:
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
590 520 50 46 560 490 50
mini
Under any circumstances, make sure the ceramic cooker hob is well ventilated
and the air inlet and outlet are not blocked. Ensure the ceramic cooker hob is in
good work state. As shown below
A(mm) B(mm) C(mm) D E
760 50 mini 20 mini Air intake Air exit 5mm
+4
+1
+4
+1