9
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-CL
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product.
Substitution of parts or accessories not designated
for use with this product by Emerson could result in
personal injury or property damage.
WARNING
!
See your local Emerson dealer, www.emersonfans.com
or the Emerson Ceiling Fan catalog for these accessories:
·
SW46 4-Speed Slide Wall Control, SW90 Fan & Light
Dual Slide Wall Control
·
LED Light Fixtures
8. Accessories
The use of any other control not specifically approved
for this fan could result in fire, shock and personal
injury.
WARNING
!
TROUBLE
PROBABLE CAUSE
SUGGESTED REMEDY
1. Fan will not start. 1. Reverse switch in neutral position.
1. Make sure reverse switch position is all the way to
one side.
2. Loose power line connections to the fan, or 2. Check line wire connections to fan and switch wire
loose switch wire connections in switch housing.
connections in the switch housing.
2. Fan sounds noisy. 1. Blades not attached to fan.
1. Attach blades to fan before operating.
2. Loose screws in motor housing.
2. Check to make sure all screws in motor housing are
snug (not over-tight).
3. Screws securing fan blade flanges
3. Check to make sure the screws which attach the fan
to motor are loose.
blade flanges to the motor are tight.
4. Wire connectors inside switch housing
4. Check to make sure wire connectors in switch housing
rattling.
are not rattling against each other or against the
interior wall of the switch housing.
5. Screws holding flanges to blades are loose. 5. Tighten securely.
3. Fan wobbles
1 Screws securing fan blade flanges to
1. Check to be sure screws which attach the fan blade
or shakes.
motor are loose.
flanges to the motor are tight.
2. Fan blade flanges not seated properly.
2. Check to be sure the fan blade flanges seat firmly and
uniformly to the surface of the motor. If flanges are
seated incorrectly, loosen the flange screws and
retighten according to the procedure in the section on
“Ceiling Fan Assembly”.
3. Mounting plate and/or ceiling outlet
3. Tighten the mounting plate screws to the outlet box,
box is not securely fastened.
and/or secure outlet box.
4. Fan blades out of balance.
4. Interchanging an adjacent (side-by-side) blade pair can
redistribute the weight and result in smoother operation.
9. Troubleshooting
FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLESHOOTING YOUR FAN.
WARNING
!
Make sure main power is turned OFF.
WARNING
Make sure main power is turned OFF.
WARNING
!
!