6
U.L. Model No.: 52-CL
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
4.1
Connect the Green Grounding Wires from the Motor
Bracket and the Mounting Plate to the Grounding
Conductor of Supply (this may be a bare wire or wire
with green colored insulation). Securely connect Wires
with Wire Connectors (supplied) (Figure 4).
4. How to Wire Your Ceiling Fan
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
!
MOUNTING PLATE GREEN
GROUND WIRE
WIRE
CONNECTOR
MOTOR BRACKET GREEN
GROUND WIRE
SUPPLY GREEN
GROUND WIRE
Figure 4
To avoid risk of fire or shock, check to see that all
connections are tight, including ground, and that no
bare wire is visible at the wire connectors, except for
the ground wire. Do not operate fan until blades are in
place. Noise and fan damage could result.
WARNING
!
4.2
Connect the Fan Motor White Wire to the Supply
White (neutral) Wire using a supplied Wire Connector
(Figure 5).
WIRE
CONNECTOR
FAN MOTOR
WHITE WIRE
SUPPLY
WHITE WIRE
Figure 5
4.6
Connect the Fan Motor Black Wire and Blue Wire to
the Supply Black (hot) Wire using a supplied Wire
Connector (Figure 6).
Your Fan is now wired to be turned ON and OFF from
the Fan Switch. After connections have been made,
turn Wires upward and carefully push Wires into the
Outlet Box, with the White and Green Wires on one
side of the Outlet Box and the Black and Blue Wires on
the other side of the Outlet Box.
Proceed to Step 1 of Section “5. CEILING FAN
ASSEMBLY”.
WIRE
CONNECTOR
SUPPLY
BLACK WIRE
FAN MOTOR
BLACK WIRE
FAN MOTOR
BLUE WIRE
Figure 6