AL1
AL2
DIMMER
LIGHT TEMP.
AM
AL1
AL2
Setting the Alarm(AL1 or AL2) On or Off.
When the Alarm comes ON, press “SNOOZE” button to pause it for 9 minutes.
Alarm indicator will flash during Snooze Alarm mode.
Snooze Alarm will
only be active for
one hour. To turn off Snooze Alarm mode,
press the
"AL1" ("AL2")
button once.
The Alarm indicator will then
become solid (to be On again same time next day).
10
12
4-
ER100104
ER100104-20180917-00
17
14
13
15
AM
AL1
AL2
Press the
“TEMP.
”button to sense indoor temperature in Fahrenheit (F)
or Celsius (C).
The temperature can be converted between Fahrenheit and Celsius by
pressing and holding the "
TEMP.
" button while in temperature mode.
1
2
Sensing Room Temperature
AL1
AL2
DIMMER
LIGHT TEMP.
AM
AL1
AL2
Celsius
Fahrenheit
AL1
AL2
DIMMER
LIGHT TEMP.
AM
AL1
AL2
Qi Wireless Charging
16
AM
AL1
AL2
AL1
AL2
DIMMER
LIGHT TEMP.
AM
AL1
AL2
AM
8
9
.
1
2
3
Smartphone/mobile device
Qi-enabled Receiver
Wireless Charging Pad
hold the
Press the “AL1” (“AL2”) button again, the Minutes will flash. Press the
“▼” or “▲” button to adjust the Minutes.
2
Press the
1.5d
6.7d
default
Press the
3
4
Press the AL1 (AL2) button again to save the Alarm settings and resume
clock mode.
5
Press the
When the AL1 (AL2) indicator lights On, Wake to Buzzer Alarm for
AL1 (AL2) will be On.
press the
repeatedly
the indicator for the AL1 (AL2) Wake to Buzzer
Alarm is Off.
Press the button indicated to turn On the LED for decorations.To turn it Off,
press the same button once.
Press the "DIMMER" button to set the clock display at one of the
4 brightness levels.
(if your smartphone
itself is not Qi-compatible)
An 5W Qi Wireless Charging Pad is built on top of this unit for wireless
power transfer to any Qi-compatible Smartphones or Qi-enabled
Receivers over a vertical distance of not more than 0.2 inches (5 mm).
Place your Qi-compatible Smartphone or Receiver (only one set at a
time) on top of the Wireless Charging Pad. The center of your
Smartphone or Receiver must be positioned properly right at the middle
of this charging pad in order to maximize the charging efficiency.
While wireless charging started or detected, the Qi indicator will be
flashing Red slowly.
While wireless charging error occurred (if metal sheet/substance
placed on top of the charging pad), the Qi indicator will be flashing Red
rapidly to alert user to get the erroneous receiver removed.
When your Smartphone is fully charged, the Qi indicator will turn solid
Green (except for iPhones).
4
The lithium backup battery needs replacement when the LOW BATTERY
indicator flashes, otherwise, the time and alarm settings will be lost/reset
after a power outage.
Leave the AC adapter connected to your AC outlet to retain memory while
the original battery is removed.
Unscrew the battery holder from the cabinet with a small screwdriver and
insert a new battery with the same CR2032 or equivalent type into the
holder the same way, observing the positive (+) polarity before sliding the
holder back into the slot. The LOW BATTERY indicator should then be Off.
polarity facing downward
