Emerson RXi2-UP Скачать руководство пользователя | Manualshive

Страница: 66 / 66

background image

General Contact Information

Home link:

http://www.emerson.com/industrial-automation-controls

Knowledge Base:

https://www.emerson.com/industrial-automation-controls/support

Technical Support

Americas
Phone:

1-888-565-4155

1-434-214-8532 (If toll free option is unavailable)

Customer Care (Quotes/Orders/Returns):

[email protected]

Technical Support:

[email protected]

Europe
Phone:

+800-4444-8001

+420-225-379-328 (If toll free option is unavailable)
+39-0362-228-5555 (from Italy - if toll-free 800 option is unavailable or dialing from
a mobile telephone)

Customer Care (Quotes/Orders/Returns):

[email protected]

Technical Support:

[email protected]

Asia
Phone:

+86-400-842-8599

+65-6955-9413 (All other Countries)

Customer Care (Quotes/Orders/Returns):

[email protected]

Technical Support:

[email protected]

Any escalation request should be sent to

[email protected]

Note: If the product is purchased through an Authorized Channel Partner, please contact the seller directly for
any support.

Emerson reserves the right to modify or improve the designs or specifications of the products mentioned in
this manual at any time without notice. Emerson does not assume responsibility for the selection, use, or
maintenance of any product. Responsibility for proper selection, use, and maintenance of any Emerson product
remains solely with the purchaser.

© 2021 Emerson. All rights reserved.

Emerson Terms and Conditions of Sale are available upon request. The Emerson logo is a trademark and
service mark of Emerson Electric Co. All other marks are the property of their respective owners.

«
...
64
65
66

Содержание RXi2-UP



































































Отзывы:

Нет отзывов

Похожие инструкции для RXi2-UP

Бренд: ABB Страницы: 9

Бренд: V.ORLANDI Страницы: 144

Бренд: NTN Страницы: 19

Бренд: TPA Страницы: 22

Бренд: IGM Страницы: 8

Бренд: Panduit Страницы: 3

Бренд: Danfoss Страницы: 6

Бренд: Delta Страницы: 15

Бренд: ZKTeco Страницы: 6

Бренд: Enerpac Страницы: 68

QUICK LOAD SERVO S3 T BARFEED

Бренд: LNS Страницы: 152

MPS-8033 Series

Бренд: ILX Lightwave Страницы: 112

Бренд: HappyJapan Страницы: 16

Бренд: EASTMAN Страницы: 20

MAXCOIL HEFA 600 MAX

Бренд: DryAIR Страницы: 35

Бренд: Mitsubishi Electric Страницы: 50

Бренд: Datacolor Страницы: 3

Бренд: Honeywell Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды