Emerson RXi HMI Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 106

Emerson RXi HMI Скачать руководство пользователя страница 106

General Contact Information

Home link:

http://www.emerson.com/industrial-automation-controls

Knowledge Base:

https://www.emerson.com/industrial-automation-controls/support

Technical Support

Americas
Phone:

1-888-565-4155

1-434-214-8532 (If toll free option is unavailable)

Customer Care (Quotes/Orders/Returns):

[email protected]

Technical Support:

[email protected]

Europe
Phone:

+800-4444-8001

+420-225-379-328 (If toll free option is unavailable)
+39-0362-228-5555 (from Italy - if toll-free 800 option is unavailable or dialing from a mobile)

Customer Care (Quotes/Orders/Returns):

[email protected]

Technical Support:

[email protected]

Asia
Phone:

+86-400-842-8599

+65-6955-9413 (All other Countries)

Customer Care (Quotes/Orders/Returns):

[email protected]

Technical Support:

[email protected]

Any escalation request should be sent to

[email protected]

Note: If the product is purchased through an Authorized Channel Partner, please contact the seller directly for any
support.

Emerson reserves the right to modify or improve the designs or specifications of the products mentioned in this manual
at any time without notice. Emerson does not assume responsibility for the selection, use, or maintenance of any
product. Responsibility for proper selection, use, and maintenance of any Emerson product remains solely with the
purchaser.

© 2021 Emerson. All rights reserved.

Emerson Terms and Conditions of Sale are available upon request. The Emerson logo is a trademark and service mark
of Emerson Electric Co. All other marks are the property of their respective owners.

«
...
104
105
106

Содержание RXi HMI











































































































Отзывы:

Нет отзывов