Emerson RXi HMI GFK-3233A, Инструкция по эксплуатации

Страница: 7 / 20

3 RXI Basic Quick Start Guide GFK-3233A
5. Apply dc power to the unit. During normal startup and operation,
the LED status indicator displays as follows:
• Solid amber while the RXi HMI unit is starting up
• Solid green during normal operation
Be sure to connect a DC power cord to this 3-pin power connector. Using a
voltage out of the range may fail to boot the system or cause damage to the
system board. The recommended connector is
Dinkle EC350VM-03P.
Step 2: Connect Your Display
The RXi HMI uses a DisplayPort to connect to a display device such as a
computer monitor. The DisplayPort connection will be used to transmit
both audio and video. If additional configuration is required, visit the
Chipset menu in the device BIOS on startup.
Operation Status LEDs (Screen)
RXi HMI has a tri-color LED built into the screen that provides visual indication
of the operation status.
LED State System State
Amber, Solid Operating system starting
Green, Solid Normal operating state
Green, Blinking Backlight off
Red, Blinking Backlight failure
Off Power not applied to the unit