manualshive.com logo in svg

Emerson Rosemount X-Stream Series, Инструкция по эксплуатации

Emerson Rosemount X-Stream Series - инновационный продукт для измерения и контроля процессов. Получите подробное описание и руководство по эксплуатации с инструкциями по настройке бесплатно на manualshive.com. Скачайте руководство в формате PDF прямо сейчас и ознакомьтесь с возможностями этого устройства для вашего бизнеса.

Поделиться
Скачать
background image

Emerson Process Management GmbH & Co. OHG

1-14

X-STREAM XE

Instruction Manual

HASXEE-IM-HS

10/2012

1.4   Comparison of Analyzer Models

1.4  Comparison of the Various X-STREAM Enhanced Analyzer Models

1

⁄

2

19 in housing, table-top or rackmountable,

 

optional with carrying handle

protection type: IP 20

1

⁄

1

19 in housing, table-top or rackmountable, 

protection type: IP 20 

Stainless steel wallmountable field housing, 

pro-

tection type: IP66 / NEMA 4X
Single (XEF) or dual (XDF) compartment design

Cast aluminum wallmountable field housing, 

protection type: IP66 / NEMA 4X

Internal wide range power supply,    

or

  

24V input with external power supply unit

Internal wide range power supply unit

Internal wide range power supply unit

Internal wide range power supply unit

Max. 3 channels in many combinations

 

max. 8 gas connections,

  

including 1 optional purge gas connection

Max. 5 channels in many combinations

 

max. 8 gas connections,  

1 optional extra connection for purge gas

Max. 5 channels in many combinations

 

max. 8 gas connections,  

1 optional extra connection for purge gas

Max. 5 channels in many combinations

 

max. 8 gas connections, 

  

including 2 optional purge gas connection

Options for gas lines: Flow sensor, pressure 

sensor, infallible gas lines. With restrictions on 
measurement channel combinations: sample 
gas pump, 1 valve block 

Options for gas lines: Flow sensor, pressure 

sensor, heating for physical components, 
sample gas pump, 1 or 2 valve blocks, infalli-
ble gas lines

Options for gas lines: Flow sensor, pressu

-

re sensor, heating for physical components, 
sample gas pump, 1 or 2 valve blocks, infalli-
ble gas lines

Options for gas lines: Flow sensor, pressu

-

re sensor, heating for physical components, 
sample gas pump, 1 or 2 valve blocks, infalli-
ble gas lines

1–5 analog outputs, 4 relay outputs, 2 Mod

-

bus Ethernet interfaces, 2 USB connectors

optional: 

  1 interface card with 7 digital inputs and

 

     9 digital outputs

  1 interface card with analog inputs

electrical interfaces accessible via sockets on 

back of unit

1–5 analog outputs, 4 relay outputs, 2 Mod

-

bus Ethernet interfaces, 2 USB connectors 

optional: 

  1 or 2 interface cards, each with 7 digital

 

           inputs and 9 digital outputs  

  1 interface card with analog inputs

electrical interfaces accessible via sockets on 

back of unit, 

optionally: screw-type terminal 

adapters

 (except for Ethernet & USB)

1–5 analog outputs, 4 relay outputs, 2 Mod

-

bus Ethernet interfaces, 2 USB connectors 

optional: 

  1 or 2 interface cards, each with 7 digital

 

           inputs and 9 digital outputs  

  1 interface card with analog inputs

electrical interfaces on internal screw-type ter-
minal adapters

 (except for Ethernet & USB)

1–5 analog outputs, 4 relay outputs, 2 Mod

-

bus Ethernet interfaces, 2 USB connectors 

optional: 

  1 or 2 interface cards, each with 7 digital

 

           inputs and 9 digital outputs  

  1 interface card with analog inputs

electrical interfaces on internal screw-type ter-
minal adapters

 (except for Ethernet & USB)

LCD

LCD

LCD, impact tested front panel

LCD, impact tested front panel 

 

Max. operating 

ambient temperature

*) 

:  

0 °C to +50 °C (32 °F to 122 °F)

Max. operating 

ambient temperature

*) 

:  

0 °C to +50 °C (32 °F to 122 °F)

Max. operating 

ambient temperature

*) 

:  

-20 °C to +50 °C (-4 °F to 122 °F)

Max. operating 

ambient temperature

*) 

: 

-20 °C to +50 °C (-4 °F to 122 °F)

Models available for use in hazardous areas 

(explosive environments)

Flameproof enclosure: approved for use in 
hazardous areas (explosive environments)

Size: (DxHxW): max. ca. 460x128.7x213 mm

  

Weight: ca. 8–12 kg (17.6 - 26.5 lb) 

Size: (DxHxW): max. ca. 411x133x482 mm  

Weight: ca. 11–16 kg (24.3–35.3 lb)

Size: (DxHxW): ca. 265x400 (815)x550 mm 

Weight: max. ca. 25 (45) kg / 55.1 (99.2) lb

Size: (DxHxW): max. ca. 222x512x578 mm 

Weight: max. ca. 63 kg (138.9 lb)

For more detailed information: 

 1-16  

For more detailed information: 

 1-18  

For more detailed information: 

 1-20

For more detailed information: 

 1-25 

*)

: Limitations apply to selected measurement principles and ranges,  

    

 Measurement specifications!

X-STREAM XEGK

X-STREAM XEGP

Содержание Rosemount X-Stream Series

























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Rosemount X-Stream Series

Icare PRO Quick Manual preview
PRO
Бренд: Icare Страницы: 3
Callaway 200 S Manual preview
200 S
Бренд: Callaway Страницы: 11
Galileo VP111 Owner'S Manual preview
VP111
Бренд: Galileo Страницы: 19
Galileo Milano II Owner'S Manual preview
Milano II
Бренд: Galileo Страницы: 71
UEi C163 Quick Start Manual preview
C163
Бренд: UEi Страницы: 8
Fender P-Bass 27-6100 Manual preview
P-Bass 27-6100
Бренд: Fender Страницы: 20
Valcom V9992 Datasheet preview
V9992
Бренд: Valcom Страницы: 1
GF Signet FlowtraMag 2580 Series Operating Instructions Manual preview
Signet FlowtraMag 2580 Series
Бренд: GF Страницы: 20
Ocea Soft Cobalt 2 Installation Manual preview
Cobalt 2
Бренд: Ocea Soft Страницы: 19
Evoqua WALLACE & TIERNAN P7 ADVANCED Instruction Manual preview
WALLACE & TIERNAN P7 ADVANCED
Бренд: Evoqua Страницы: 98
YATO YT-72977 Manual preview
YT-72977
Бренд: YATO Страницы: 36
Rhosonics SDM Series Manual preview
SDM Series
Бренд: Rhosonics Страницы: 65
Armstrong Monitoring Corporation AMC-CD2 Instruction Manual preview
AMC-CD2
Бренд: Armstrong Monitoring Corporation Страницы: 12
Veeco Dektak 150 User Manual preview
Dektak 150
Бренд: Veeco Страницы: 349
GrainPro GPO2-AN Instruction Manual preview
GPO2-AN
Бренд: GrainPro Страницы: 7
Caen DT5740 Technical Information Manual preview
DT5740
Бренд: Caen Страницы: 50
Hanna Instruments HI 93723 Instruction Manual preview
HI 93723
Бренд: Hanna Instruments Страницы: 2
Badger Meter American AL-1000 Installation & Operation Manual preview
American AL-1000
Бренд: Badger Meter Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды