Emerson Rosemount Wireless Pressure Gauge, Быстрый старт

Страница: 14 / 28

6 Troubleshooting
This section provides information for basic troubleshooting. See Wireless
Pressure Gauge Reference Manual for advanced troubleshooting.
Device status
The flashing LED indicates device status using the colors descibed.
Table 6-1: Status Descriptions
LED color Device status
Green Functioning properly
Amber Battery is low, battery replacement recommended
Red Battery replacement required OR Device is
malfunctioning
No
color No power, verify ON/OFF switch is in “on” position
6.1 Pressure measurement
If the mounting effects have not been eliminated after completing Eliminate
mounting effects , perform this alternative procedure for verifying the
pressure value.
Procedure
1. From the HOME screen, eter the HART
®
Fast Key sequence.
Device dashboard Fast
Keys 2, 2, 1, 1, 1
2. Follow the commands to perform the procedure.
6.2 Wireless connectivity
If the device has not joined to the network after power up, verify the
following:
• Active Advertising has been enabled on the Smart Wireless Gateway
Quick Start Guide Feburary 2021
14 Emerson.com/Rosemount