Emerson Rosemount 5900S Series, Справочное руководство

Страница: 289 / 298

Table C-17: Register Transducer Block Parameters
(continued)
Index
Number Parameter Description
INP_REG_n_FLOAT Input register n value, displayed as floating point
number
INP_REG_n_INT_DEC Input register n value, displayed as decimal number
45-74 DB_REG_n_TYPE Describes characteristics of holding register n.
Indicates requested value is displayed as a floating
point (/ decimal) number.
DB_REG_n_FLOAT Holding register n value, displayed as floating point
number.
DB_REG_n_INT_DEC Holding register n value, displayed as decimal
number.
75 RM_COMMAND Defines what action to perform; Read Input/Holding
Register, Restart Device, Poll Program Complete.
76 RM_DATA
77 RM_STATUS
78 INP_SEARCH_START_NBR Input register search start number
79 DB_SEARCH_START_NBR Holding register search start number
C.7 Advanced Configuration Transducer block
Table C-18: Advanced Configuration Transducer Block Parameters
Index
Number Parameter Description
1 ST_REV The revision level of the static data associated
with the function block. The revision value
increments each time a static parameter value in
the block is changed.
2 TAG_DESC The user description of the intended application
of the block.
3 STRATEGY The strategy field can be used to identify
grouping of blocks. This data is not checked or
processed by the block.
4 ALERT_KEY The identification number of the plant unit. This
information may be used in the host for sorting
alarms, etc.
5 MODE_BLK The actual, target, permitted, and normal modes
of the block. Target: The mode to “go to” Actual:
The mode the “block is currently in” Permitted:
Allowed modes that target may take on Normal:
Most common mode for target
Reference Manual F
OUNDATION
™
Fieldbus Block Information
00809-0100-5900 September 2019
Rosemount 5900S Radar Level Gauge 289