Emerson Rosemount 3108, Быстрый старт

Страница: 18 / 40

6 Configuration
The transmitter can be configured and verified using a Field Communicator
or a Rosemount 3490 Series Control Unit.
The parameters in this section are sufficient for a basic level, contents
(volume), or open channel flow application. For a more advanced
application, refer to the Rosemount 3107 Level and 3108 Flow Transmitters
Reference Manual .
6.1 Transmitter base units
When the transmitter is shipped from the factory, the default factory setting
for Base Units is “metric” or “imperial ft” depending on the model order
code.
Note
Keep a record of your programmed settings. Changing the base units will
reset parameters to their default factory settings in the appropriate units.
6.1.1 Selecting Base Units (Field Communicator or AMS)
To change the transmitter base units:
Procedure
1. From the Home screen, select 3: Service Tools .
2. Select 4: Maintenance .
3. Select
3: Utilities
.
4. Select 3: Set Base Units .
5. Select new base units.
Note
When on-screen messages appear, take action if needed and press
“
OK
”.
6.1.2 View or change the transmitter base units (Rosemount 3490 Series
Control Unit)
To view or change the transmitter base units:
Quick Start Guide August 2019
18 Rosemount Ultrasonic 3107 Level and 3108 Flow Transmitters