6
ETL Model No.: CF630
MOTOR
COUPLER
4.5"
DOWNROD
LOOSEN
PHILLIPS HEAD
SET SCREWS (2)
Figure 3
3.4
Loosen the two Set Screws in the Motor Coupler for
installation of the Downrod (Figure 3).
Seat the 4.5” Downrod in the Motor Coupler (Figure 3).
Rotate and align the Downrod holes with all the holes in
the Motor Coupler (Figure 3).
3. Ceiling Fan Assembly
(Continued)
HAIRPIN
CLIP
HAIRPIN
CLIP
CLEVIS
PIN
RETIGHTEN
PHILLIPS HEAD
SET SCREWS (2)
MOTOR
COUPLER
CLEVIS
PIN
Figure 4
3.5
Align the Clevis Pin holes in the Downrod with the holes
in the Motor Coupler.
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 4).
The Clevis Pin must go through the holes in the Motor
Coupler. It is critical that the Clevis Pin in the Motor
Coupler is properly installed and securely tightened.
Retighten the Phillips Head Set Screws to secure the
Downrod to the Motor (Figure 4).
It is critical that the clevis pin and set screws in the
motor coupler are properly installed and securely
tightened. Failure to verify that the pin and set screws
are properly installed could result in the fan falling.
WARNING
!
COUPLER
COVER
FAN MOTOR
HOUSING
GROMMET
DOWNROD
Figure 5
3.6
Make sure the Grommet is properly installed in the
Coupler Cover, then slide the Coupler Cover on the
Downrod until it rests on the Fan Motor Housing
(Figure 5).