Emerson ROCKPOINTE CF630ORB00 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 30

Emerson ROCKPOINTE CF630ORB00 Скачать руководство пользователя страница 27

27

emersonfans.com

Please contact 1-800-654-3545 for further assistance

ETL Model No.: CF630

14. Repair Parts Listing

Before discarding packaging material, be certain all parts have been removed.

HOW TO ORDER REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:

The model number of your Fan will be found on a label attached to the top housing.
For repair parts, phone 1-800-654-3545.

Model Numbers

Key

No. Description CF630RB00 CF630SW00 CF630VS00

* Hanger Ball Assembly, Consisting of: 761655-32 761655-92 761655-93

1 Hanger Bracket (1) — — —

2 Hanger Ball (1) — — —

3 4.5” Downrod Assembly (1) — — —
* Hardware Bag Containing: 764834-BLXS 764834-SWS 764834-BLXS

4 Wire Connectors (5) — — —

5 Threaded Studs, #8-32 x 1-1/4” (2) — — —

6 Lockwashers, #8 External Tooth (2) — — —

7 Knurled Knobs, #8-32 (2) — — —

8 Clevis Pin (1) — — —

9 Hairpin Clip (1) — — —

10 #6-32 x 1/2” Truss Head Screws w/Lockwashers (6) — — —

11 #6-32 x 3/8” Truss Head Screw w/Lockwasher (spares) (2) — — —

12 1/4-20 x 9/16” Pan Head Screws w/Lockwashers (11) — — —

13 #8-32 x 1/4” Washer Head Screws (16) — — —

  14   Blade Balance Kit (1)          —       —        —
  15   Ceiling Cover (1)       764818-ORB 764818-SW    764818-VS
  16   Motor Coupler Cover (1)       764819-ORB 764819-SW    764819-VS
  17   Motor Hub (1)         764821      764821      764821
  18   Flange Set (Set of 5)          764822-ORB 764822-SW    764822-VS
  19   Blade Set (Set of 5)         764824-WA   764824-DFT   764824-WA
  20   Lower Housing (1)          764827-ORB 764827-SW    764827-VS
  21   Light Kit Housing Assembly (1)          764829      764829      764829
  22   Wiring Harness Assembly (1)          764833-BL   764833-W   764833-BL
  23   Decorative Grill Brackets with Hardware (5 each)    764828-ORB 764828-SW    764828-VS
  24   Decorative Grill (1)         764832-ORB 764832-SW    764832-VS
  25   Glass Shade (1)       764831-OM   764831-OM   764831-OM
  26   Receiver (1)          RCFP       RCFP       RCFP
  27   Wall Control Transmitter w/Hardware (1)    SW406       SW406       SW406
  —    Owner's Manual         BP7521      BP7521    BP7521

• PART DESCRIPTION

• MODEL NUMBER

• PART NUMBER

• NAME OF ITEM

«
...
25
26
27
28
29
...
»

Содержание ROCKPOINTE CF630ORB00































Отзывы:

Нет отзывов