Set Up Motor Room Temperature and Plenum Temperature Inputs
Appendix A: TD Quick Start • 63
3. To set the motor room temperature,
arrow down to
SPARE ANALOG
IN
and arrow right to set
Board
to
1
and
Point
to
1
.
4. Arrow down to
SpareAnlg5 Mode
and set to
Local Only
. Press
for
Look Up menu (
for Look Up if
using an E2).
5. Arrow down to
SpareAnlg5 EU
(En-
gineering Units) and set to
DF
(De-
grees Fahrenheit). Press
for Look
Up menu (
for Look Up if using
an E2).
6. Arrow down to
SPARE ANLG5 IN
and arrow right to set
Board
to
1
, and
Point
to
9
.
Figure A-2 - Global Data Setup Degrees Fahrenheit
Figure A-3 - Global Data Setup Board and Point
Figure A-4 - Global Data Setup Spare Analog 5 Mode
Figure A-5 - Global Data Setup Spare Analog 5 EU
