Inline viscosity retrofit (plan view)
Figure 2-2:
Note
The HFVM inline viscosity meter is mounted 25 mm (0.98 in) away from the main flow line, allowing good
product mixing, sensor protection, and stable measurement conditions.
2.2.3
Mount with a capillary viscosity retrofit kit
The capillary viscosity retrofit kit provides a simple, direct replacement for existing
capillary meters.
Typically, capillary meters operate with their own measurement chamber that attaches to
the HFVM. No pipework changes are necessary.
CAUTION!
Observe all corporate and government safety regulations. Wear protective clothing, safety
glasses, and gloves to prevent burns and the absorption of hot oil.
Prerequisites
Verify the following conditions:
Mounting
Installation Manual
15
