1
Before you begin
1.1
About this document
This manual provides information on planning, mounting, wiring, and initial setup of the
5700 transmitter. For information on full configuration, maintenance, troubleshooting, or
service of the transmitter, see the configuration and use manual.
The information in this document assumes that users understand basic transmitter and
sensor installation, configuration, and maintenance concepts and procedures.
1.2
Hazard messages
This document uses the following criteria for hazard messages based on ANSI standards
Z535.6-2011 (R2017).
DANGER
Serious injury or death will occur if a hazardous situation is not avoided.
WARNING
Serious injury or death could occur if a hazardous situation is not avoided.
CAUTION
Minor or moderate injury will or could occur if a hazardous situation is not avoided.
NOTICE
Data loss, property damage, hardware damage, or software damage can occur if a
situation is not avoided. There is no credible risk of physical injury.
Physical access
NOTICE
Unauthorized personnel can potentially cause significant damage and/or misconfiguration
of end users' equipment. Protect against all intentional or unintentional unauthorized use.
Physical security is an important part of any security program and fundamental to
protecting your system. Restrict physical access to protect users' assets. This is true for all
systems used within the facility.
1.3
Related documentation
You can find all product documentation on the product documentation DVD shipped with
the product or at
.
See any of the following documents for more information:
•
Micro Motion 5700 Product Data Sheet
•
Micro Motion 5700 Transmitters with Configurable Outputs: Configuration and Use Manual
Installation Manual
Before you begin
MMI-20027478
February 2020
Installation Manual
5
