Emerson Micro Motion 3711, Руководство по конфигурации и использованию, Страница: 23 / 234

Configuration and Use Manual 15
Ge
tti
n
g
Sta
rted
Co
mm
uni
cati
on
s
Sy
stem
Be
fo
re
Y
o
u
Begin
Chapter 3
System Configuration
3.1 Overview
This chapter discusses the following topics:
• Setting the Model 3711 clock
• Configuring security
• Configuring device information
• Configuring the Auto Scan interval
• Configuring TLP display options
Note: During the configuration process, save your data frequently, both to the PC and to the
Model 3711’s flash memory. To save your data to a file, click File > Save Configuration. To save your
data to flash memory, click Device > Flags > Save Configuration. For information on flash memory,
see Section 14.3.
3.2 Setting the Model 3711 clock
Setting the Model 3711 clock is required for accurate timestamping and control of the historical
databases, event log, and alarm log.
To set the Model 3711 clock:
1. Connect to the Model 3711.
2. Click Device > Clock , or click the Clock icon in the toolbar. The dialog box shown in
Figure 3-1 is displayed.
3. If the clock in your PC is set correctly, click the red circle in the lower left corner of the
calendar to synchronize the Model 3711 clock to the PC clock. If the clock in your PC is not
set correctly, use the ROCLINK 800 calendar to select the day, month, and year. Then enter the
time in the time field, or use the arrows. Use
A
and
P
for
AM
and
PM
.
4. If you want the clock in the Model 3711 to automatically adjust for daylight savings time,
click
Enabled
.
5. Click Apply .
6. Click
Update
to update the ROCLINK 800 screen to the current Model 3711 value.
7. Click OK .