Your transmitter supports two event models:
•
Basic event model
•
Enhanced event model
6.6.1
Configure a basic event
ProLink III
Device Tools > Configuration > Events > Basic Events
Field Communicator Not available
Overview
A basic event is used to provide notification of process changes. A basic event occurs (is
ON) if the real-time value of a user-specified process variable moves above (HI) or below
(LO) a user-defined setpoint. You can define up to two basic events. Event status can be
queried via digital communications, and a Discrete Output can be configured to report
event status.
Procedure
1.
Select the event that you want to configure.
2.
Specify Event Type.
Option
Description
HI
x
> A
The event occurs when the value of the assigned process variable (
x
) is
greater than the setpoint (Setpoint A), endpoint not included.
LO
x
< A
The event occurs when the value of the assigned process variable (
x
) is
less than the setpoint (Setpoint A), endpoint not included.
3.
Assign a process variable to the event.
4.
Set a value for Setpoint A.
5.
(Optional) Configure a Discrete Output to switch states in response to the event
status.
6.6.2
Configure an enhanced event
ProLink III
Device Tools > Configuration > Events > Enhanced Events
Field Communicator Configure > Alert Setup > Discrete Events
Integrate the meter with the control system
100
Micro Motion Model 2500 Transmitters with Configurable Input/Outputs
Содержание Micro Motion 2500
