4.
Connect the white wire from the light kit
plate to the white wire in the fan motor/
housing assembly (Figure 6). Connect
the black wire from the light kit plate to
the black wire in the fan motor/housing
assembly.
1/4-20 x 11mm PAN HEAD
SCREW (2 per flange)
BLADE
FLANGE
MOTOR
HUB
Figure 5
6
LIGHT KIT
PLATE
BLACK WIRE
BLUE WIRE
FAN MOTOR/
HOUSING
ASSEMBLY
WHITE WIRES
Figure 6
U.L. Model No.: CF205
How to Assemble Your
Ceiling Fan
1.
Mount the fan blades to the blade
flanges using three 10-24 x 9mm oval
head screws and three decorative
blade nuts (supplied) (Figure 4).
2.
Remove and discard the three shipping
retainers securing the motor hub in the
motor housing.
NOTE: Take care not to scratch the fan
housing when installing the blade
assemblies.
3.
Rotate the motor hub to position the
slot in the motor plate over a fan motor/
housing flange hole. Attach the blade
flange assembly on the fan motor/
housing by slowly rotating the motor
hub to align screw holes. Tighten the
screws securely while interlocking the
flange assemblies as you rotate the
hub (Figure 5).
Your ceiling fan can be assembled with
the light kit and glass or without the
light kit and glass. To assemble without
the light kit and glass, you will use the
no-light cover plate. In order to use the
no-light cover plate, the light sockets
will need to be removed from the light
kit plate.
FAN BLADE
DECORATIVE
BLADE NUTS (3)
BLADE
FLANGE
10-24 X 9mm OVAL
HEAD SCREW (3)
Figure 4
To reduce the risk of personal injury,
do not bend the blade flange when
installing the blade flanges, balanc-
ing the blades or cleaning the fan. Do
not insert foreign objects in between
rotating fan blades.
!
WARNING
CAUTION: Before installing and tight-
ening the screws, be sure there are no
wires pinched between the light kit
plate and the fan motor/housing
assembly.
NOTE: In order to remove the light
sockets, the wires on the light kit plate
will need to be cut. MAKE SURE THIS IS
THE NO LIGHT ASSEMBLY DESIRED.
NOTE: If no light kit is to be used on the
ceiling fan, disregard Steps 4 and 5;
proceed to “How to Disassemble Your
Light Kit for Cover Plate Assembly
Only”, then continue to Step 6.
BP7375 Highpointe 12/9/08 11:08 AM Page 6