manualshive.com logo in svg

Emerson HIGHPOINTE CF205BS00, Руководство пользователя, Страница: 15 / 20

Поделиться
Скачать
Emerson HIGHPOINTE CF205BS00 Скачать руководство пользователя страница 15

15

Do not use water when cleaning your
ceiling fan. It could damage the
motor or the blades and create the
possibility of an electrical shock.

!

WARNING

The use of any other control not
specifically approved for this fan
could result in fire, shock and per-
sonal injury.

!

WARNING

This product is designed to use only
those parts supplied with this
product and/or any accessories
designated specifically for use with
this product by Emerson Electric Co.
Substitution of parts or accessories
not designated for use with this
product by Emerson Electric Co.
could result in personal injury or
property damage.

!

WARNING

Maintenance

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is
the only maintenance that is needed.

When cleaning, use only a soft brush or
lint free cloth to avoid scratching the finish.

Abrasive cleaning agents are not required
and should be avoided to prevent damage
to finish.

Accessories

1.

Downrod Extension Kits (see store or
catalog).

2.

Ceiling Fan Controls (see store or
catalog).

U.L. Model No.: CF205

Trouble Shooting Wall

Control/Receiver

Fan/Light Fails to Operate

• Check that the wall switch for the ceiling

fan is in the “ON” position.

• Check that the battery is good (red

indicator light should light when any
button is pressed).

• Check that the receiver is wired

properly.

• Check that both transmitter and receiver

code switches are set in the same
position.

BP7375 Highpointe  12/9/08  11:08 AM  Page 15

Содержание HIGHPOINTE CF205BS00





















Отзывы:

Нет отзывов