Emerson Fisher easy-Drive RPU-100, Инструкция по эксплуатации

Страница: 9 / 24

Instruction Manual
D104551X012
easy-Drive RPU-100
May 2021
9
6. Once the RPU-100 is locked in place install the two mounting screws to finish securing the unit.
X1721 X1724
Figure 9.
7. Use the provided wiring harness to connect the RPU-100 to the easy-Drive control board. Tighten all terminals to
ensure solid mechanical connection. Ensure the red wire is connected to the 12/24 VDC + Power.
8. After wiring connections have been completed, install easy-Drive actuator upper enclosure per the applicable
actuator instruction manual.
9. Use the easy-Drive configurator to configure the RPU-100 after installation.
X1722
RED WIRE TO 12/24 VDC+POWER
Figure 10.
X1810
FRONT VIEW
REAR VIEW