background image

www.Fisher.com

Fisher

r

 8580 Rotary Valve

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scope of Manual 

1

. . . . . . . . . . . . . . . . . . . . . . . . .

Description 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance

6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Packing Maintenance 

7

. . . . . . . . . . . . . . . . . . . . .

Replacing the Seal Ring Assembly

11

. . . . . . . . .

Replacing the Disk, Shafts, or Bearings

11

. . . . .

Actuator Mounting 

15

. . . . . . . . . . . . . . . . . . . . . . .

Parts Ordering 

17

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts Kits

17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts List 

18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction

Scope of Manual

This instruction manual includes installation,
maintenance, and parts information for the Fisher
8580 valve, DN50 through DN300 or NPS 2 through
NPS 12 (figure 1). Refer to separate instruction
manuals for information covering the power on-off
actuator and accessories.

Do not install, operate, or maintain an 8580 valve
without being fully trained and qualified in valve,
actuator, and accessory installation, operation, and
maintenance. To avoid personal injury or property
damage, it is important to carefully read, understand,
and follow all the contents of this manual, including
all safety cautions and warnings. If you have any
questions about these instructions, contact your
Emerson Process Management sales office before
proceeding.

Figure 1. Fisher 8580 Valve with 2052 Actuator 

and DVC6000 Digital Valve Controller

W9425

SINGLE FLANGE STYLE

WAFER STYLE

W9498

Instruction Manual

D103300X012
March 2010

8580 Valve

Содержание Fisher 8580





















Отзывы: