manualshive.com logo in svg

Emerson Fisher 3025, Инструкция по эксплуатации

Поделиться
Скачать
Emerson Fisher 3025 Скачать руководство пользователя страница 1

www.Fisher.com

Fisher

r

 3025 Sizes P460, P462, P460-200, and

P900 Diaphragm Actuator

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scope of Manual

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Description

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Mounting the Actuator on the Valve

3

. . . . . . . . . . . .

Travel Stop Adjustment

4

. . . . . . . . . . . . . . . . . . . . . . .

Installing the Stem Connector Assembly

5

. . . . . . . . .

Loading Connection

6

. . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance

6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Actuator Maintenance

6

. . . . . . . . . . . . . . . . . . . . . . . .

Size P460 Actuator

7

. . . . . . . . . . . . . . . . . . . . . . .

Size P462 Actuator

9

. . . . . . . . . . . . . . . . . . . . . . .

Size P460-200 Actuator

12

. . . . . . . . . . . . . . . . . .

Size P900 Actuator

14

. . . . . . . . . . . . . . . . . . . . . .

Side Mounted Handwheel Maintenance

18

. . . . . . . . .

Parts Ordering

21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts List

22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Actuator Assembly

22

. . . . . . . . . . . . . . . . . . . . . . . . . .

Side-Mounted Handwheel

23

. . . . . . . . . . . . . . . . . . . .

Figure 1. Fisher 3025 Size P460-200 Actuator

W9088

Introduction

Scope of Manual

This instruction manual includes installation, maintenance, and parts information for Fisher 3025 actuators in sizes
P460, P462, P460-200, and P900. Refer to separate manuals for instructions covering the positioner and other
accessories used with these actuators.

Do not install, operate, or maintain 3025 actuators without being fully trained and qualified in valve, actuator, and
accessory installation, operation, and maintenance. To avoid personal injury or property damage, it is important to
carefully read, understand, and follow all the contents of this manual, including all safety cautions and warnings. If you
have any questions about these instructions, contact your Emerson Process Management sales office before
proceeding.

Instruction Manual

D251402X012

3025 Actuator

May 2011

Содержание Fisher 3025









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды