Emerson Fisher 1069 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 16

Emerson Fisher 1069 Скачать руководство пользователя страница 13

Instruction Manual

D100333X012

1069 Actuator

April 2018

13

3. When the pointer on the declutching handwheel assembly is pointing to the correct marking on the gear box

housing, release the declutching handwheel.

D

To engage the manual operator, position the declutching handwheel pointer to the marking that has two arrows

facing toward each other.

D

To disengage the manual operator, position the declutching handwheel pointer to the marking that has two arrows

facing away from each other.

4. If necessary, rotate the main handwheel several degrees in either direction to ensure that the gear teeth of the

interlocking gears mesh correctly. Also, if necessary, push in the declutching handwheel firmly while it is in the
appropriate position to help interlock the gears.

Operation

Rotate the main handwheel counterclockwise to open the valve and clockwise to close the valve.

Parts Ordering

When corresponding with your

Emerson sales office

or Local Business Partner about this equipment, refer to the serial

number found on the actuator nameplate (key 32, figure 4). Also specify the complete 11‐character part number from
the following parts list when ordering replacement parts.

WARNING

Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher actuator, because they may void your warranty, might adversely affect
the performance of the valve, and could cause personal injury and property damage.

«
...
11
12
13
14
15
...
»

Содержание Fisher 1069

















Отзывы:

Нет отзывов