Emerson Daniel 3812 Скачать руководство пользователя

Страница: 139 / 142

118

M.I.T License

Open source licenses

Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual

June 2017

3-9000-765 Rev H

B.4

M.I.T License

For more details about the Open Source

MIT license or the Open Source Initiative follow the link below:

http://www.opensource.org/licenses/mit-license.php

The MIT License

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation files (the "Software"), to deal in the Software without restriction,

including without limitation the rights to use, copy, modify, merge, publish, distribute,

sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or

substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION

WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Содержание Daniel 3812















































































































































Результаты поиска

Содержание Daniel 3812

Отзывы:

Похожие инструкции для Daniel 3812

Бренды по названию

Популярные бренды

Emerson Daniel 3812, Руководство по установке

Результаты поиска

Содержание Daniel 3812

Отзывы:

Похожие инструкции для Daniel 3812

Бренды по названию

Популярные бренды