Emerson daniel 1500 series, Руководство пользователя

Страница: 38 / 104

Note
Remote mount the LME when the ambient temperature is above 60 °C (140 °F).
2.1.1 Design considerations
Some conditions to consider:
• Service operating pressure
• Service testing pressures
• Service process temperature and ambient site temperatures
• Chemical composition and fluid toxicity in operating conditions
• Traffic, wind and earthquake at loading site
• Adverse force or stress caused by inadequate supports, attachments, piping, etc.
• Corrosion, erosion, fatigue, etc.
• Decomposition of unstable fluids in operating and test conditions
• Possible damage from external fire
• Mass of fluid in process and test conditions
WARNING!
FUNCTIONAL AND ENVIRONMENTAL HAZARD
Evaluate the functional and environmental conditions prior to installing a turbine meter. Install
the turbine meter in a well designed piping system.
Failure to comply may result in death or serious injury.
2.1.2 Environmental conditions
WARNING!
EQUIPMENT HAZARD
Never use this equipment for any purpose other than its intended use.
Failure to comply may result in death, serious injury and/or property damage.
Environmental conditions Table 2-2:
Parameter type Description
Maximum working pressure This is based on the temperature and pressure rating of the ANSI
B16.5 flanges.
Severe service conditions Ensure that piping or other attachments connected to the tur-
bine meter are not under stress. The design of the turbine meter
has not been assessed for the effects of wind, earthquake load-
ing and/or other severe weather conditions.
Operating conditions and specifications
28 Daniel Series 1500 Liquid Turbine Meter, NPS 3-24