15.
Turn fan assembly over so the bottom is oriented
up. Partially install two 8-32 x 1/2” screws
(supplied) in the switch housing assembly (Figure
10). Slip the speed control switch chain through the
hole in the upper cover trim, then position the cover
trim on the switch housing assembly so that the two
screws protrude through the key hole slots in the
cover trim. Turn the cover trim fully clockwise and
then securely tighten the two 8-32 x 1/2” screws.
16.
Position the lower trim assembly on the upper
cover trim so that the tabs on the lower trim
assembly slide into the slots in the upper cover trim
(Figure 11). Then securely install four 8-32 x 1/2”
screws (supplied).
TURN
TURN
8-32 x1/2"
SCREW (2)
UPPER
COVER
TRIM
HOLE FOR SPEED
CONTROL SWITCH
CHAIN
SWITCH HOUSING
ASSEMBLY
LOOKING UP INTO SWITCH HOUSING ASSEMBLY
Figure 10
8-32 x 1/2"
SCREW (4)
LOWER TRIM
ASSEMBLY
UPPER
COVER
TRIM
SLOT
Figure 11
Ceiling Fan Assembly
(continued)
8
U.L. Model No.: CF1
Please call Emerson technical support at
1-800-654-3545 if you have any questions
about installation and operation of this ceiling fan.
