background image

1

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

  1.) Read these instructions.

  2.) Keep these instructions.

  3.) Heed all warnings.

  4.) Follow all instructions.

  5.) Do not use this apparatus near water.

  6.) Clean only with dry cloth.

  7.) Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

  8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

  9.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11.) Only use attachments / accessories specified by the manufacturer.

12.) Unplug this apparatus during lightning storms or when unused for long periods of time.

13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

14.) This appliance shall not be exposed to dripping or splashing water and no object filled with

liquids such as vases shall be placed on the apparatus.

15.) Do not overload wall outlet. Use only power source as indicated.

16.) Use replacement parts as specified by the manufacturer.

17.) The product may be mounted to a wall only if recommended by the manufacturer.

18.) Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks.

!

C AU T I O N

RISK  OF  ELECTRIC  SHOCK

DO  NOT   OPEN

The lightning flash with arrow-
head  symbol,  within  an  equi-
lateral  triangle  is  intended  to
alert the user to the presence
of  uninsulated ‘dangerous voltage’
within the product’s enclosure
that    may    be    of    sufficient
magnitude to constitute a risk
of  electric  shock  to  persons.

The exclamation point within
an  equilateral triangle  is  in-
tended  to  alert  the  user  to
the  presence  of  important
operating  and  maintenance
(s er vi ci ng)  ins tr uc ti ons  in
the  lit er at ure  accompany-
ing  the  appl ianc e.

WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO  NOT  REMOVE  COVER
( O R   B A C K ) ,   N O   U S E R
SERVICEABLE   PARTS   INSIDE
R E F E R   S E R V I C I N G   T O
Q U A L I F I E D   S E R V I C E
PERSONNEL.

C A U T I O N

CKD2300_060305.p65

3/6/2005, 11:04

1

Содержание CKD2300





























Отзывы: