Emerson Branson LPX, Инструкция по эксплуатации, Страница: 53 / 88

100-412-196 REV. 06 43
5.5.2 User I/O Connection
The LPX Power Supply is equipped with a standard external connection to allow you to
design and connect your own custom interface for controlling the unit. The User I/O
interface can be useful when you need to activate the LPX Power Supply remotely, for
example, when the operator must start and stop the unit from another room for safety
reasons.
1. All voltages and currents measured with respect to Pin 7, Common, except Seek +/-, which is measured
Pin 8 (+) to Pin 9 (-)
2. Outputs should never drive impedances less than 1.6 K
Ω
Table 5.13 User I/O Pin-Out (DB9F) provided for customer-designed interface
Pin Function
Signal
Type
Signal Range Values
1 Alarm/Error Reset Input 0 V to 24 V ±10%
Apply 0 V to reset
alarms/errors
2 Start/Stop Input 0 V to 24 V ±10%
Apply +24 VDC to
start/stop the cycle
3
Sonics On
Output
0 V to 24 V ±10%
20 mA
0 V indicates the
function is active
See Register 19 in
6.4
System Configuration
Registers .
Cycle Running
End of Cycle Pulse
4 Alarm/Error Output
0 V to 24 V ±10%
20 mA
0 V indicates an
alarm/error occurred
5 Ready Output
0 V to 24 V ±10%
20 mA
0 V indicates the
system is ready
6 +24 V Source Output
0 V to 24 V ±10%
125 mA Max
+24 V Source from
power supply
7 +24 V Return
I/O
Signal
Return
0 V Ground Return for all pins
8 +External Seek
Input 0 V to 24 V ±10%
Apply +24 VDC to
perform a seek
9 -External Seek