11
U.L. Model No.: CF440
Remote Control Procedures
HIGH TO LOW BUTTONS
POWER
INDICATOR
LIGHT
LIGHT
BUTTON
FAN
BUTTON
STORAGE
BRACKET
TO INSTALL BRACKET
TO WALL:
SLIDE THE COVER UP
TO EXPOSE THE SCREW
HOLES FOR
INSTALLATION
COVER
SCREW
HOLES (2)
WALL
BRACKET
Figure 19
Operation of Remote Control
IMPORTANT
Fan installation must be completed, including the
installation of the fan blades, before testing of the
remote control.
Your remote control has full control of your fan and
light (Figure 19).
1.
To set the desired fan speed, hold the FAN ( )
button down, then press one of the four buttons
(
.
,
..
,
...
,
....
) to operate your fan from low to high
speeds.
2.
To turn the light on and off, press the LIGHT ( )
button down, then press one of the four buttons
(
.
,
..
,
...
,
....
) to operate your light intensity from low
to high intensities.
Note: When turning the light on, light will
illuminate at the previously selected intensity.
Operation of Reverse Switch
All fans are shipped from the factory with the
reversing switch positioned to circulate air downward.
If airflow is desired in the opposite direction, turn your
fan off and wait for the blades to stop turning, then
slide the reversing switch to the opposite position, and
turn fan on again. The fan blades will turn in the
opposite direction and reverse the airflow (Figure 20).
• Warm weather - (Counterclockwise) A downward
air flow creates a cooling effect. This allows you to
set your air conditioner on a higher setting without
affecting your comfort. The switch is in the left
position.
• Cool weather - (Clockwise) An upward air flow
moves warm air off the ceiling. This allows you to
set your heating unit on a lower setting without
affecting your comfort. The switch is in the right
position.
REVERSE
SWITCH
SLIDE REVERSE SWITCH
RIGHT OR LEFT TO CHANGE
BLADE DIRECTION
Figure 20